🛠️ LIMITED-TIME 50% OFF! Rechargeable LED Work Light — 3 Modes, Hook Mount ⚡
🛠️ LIMITED-TIME 50% OFF! Rechargeable LED Work Light — 3 Modes, Hook Mount ⚡
| Minimum Qty | Discount |
|---|
Couldn't load pickup availability
GARAGE · WORKSHOP · OUTDOORS
Rechargeable
LED Work Light
See the job. Free your hands.
Bring a broad strip of COB light to the area you are working on. Magnetic mounting, hanging hooks, and adjustable ends help you position the beam for vehicle maintenance, DIY projects, and outdoor setups.
3000lm rated output · 3 light modes · Type-C charging
Broad COB illumination
An elongated light strip spreads light across your work area.
Magnetic + hook mounting
Position the light on suitable metal or hang it from a secure support.
High, Low & Strobe
Three selectable modes for different lighting needs.
Rechargeable power
Built-in batteries and a Type-C input for convenient recharging.
01 / WORKSPACE VISIBILITY
Light the work area, from edge to edge.
A long COB light strip provides broad illumination for inspecting components, working at a bench, or organizing equipment after dark. The bar format lets you place light alongside the task instead of holding a flashlight throughout the job.
With a listed output of 3000 lumens, it is designed to bring useful light to dim garages, workspaces, and outdoor setups.
02 / THREE MODES
Choose the light for the task.
High
Use the stronger setting when the task calls for more light.
Low
Choose a lower output when full brightness is unnecessary.
Strobe
Select a flashing output when a visible attention signal is needed.
Use the mode control to select High, Low, or Strobe. For steady close-up work, choose one of the two continuous-light settings.
03 / HANDS-FREE POSITIONING
Set it in place. Keep both hands on the job.
Magnetic end mounts attach to suitable ferrous metal surfaces, while the hanging hooks offer another way to support the light. Position it under a hood, near a workbench, or at your outdoor setup.
Check that the mounting point holds securely before letting go. The adjustable end supports help you orient the light toward the area you need to see.
04 / ADJUST & CHECK
Small details that make setup easier.
Rotating and tilting end supports give you more positioning options, whether you are hanging the light or using its magnetic mounts. Reposition the beam as your working angle changes.
A four-level battery indicator offers a quick view of the remaining charge, making it easier to plan a recharge before your next task.
05 / PORTABLE POWER
Recharge between jobs.
Built-in lithium batteries power the light without a trailing power cord during use. Recharge through the Type-C port with a 5V / 1A supply, then keep it ready for the garage, workshop, or next trip.
The listed battery configuration is 2 × 2600mAh 18650 cells, with a stated runtime of 3+ hours. Actual runtime varies with the selected mode, battery condition, and operating conditions.
06 / PRACTICAL CONSTRUCTION
Splash resistance for everyday use.
An ABS housing and an IPX4 splash-resistance rating support use around occasional splashes. The green and black casing makes the light easy to recognize among your tools.
IPX4 does not mean submersible. Keep the charging connection dry, avoid immersion, and follow the supplied use and care instructions.
07 / SIZE & HANDLING
A slim bar for the tool kit.
Measuring approximately 51.3 × 5.1 × 5.1cm (20.2 × 2.0 × 2.0in), the elongated design is easy to lay alongside other equipment. Its listed weight is 541.5g (about 19.1oz).
Keep it with your vehicle-maintenance tools, workshop supplies, or camping gear so portable task lighting is close when you need it.
Ready in three simple steps.
1. Charge
Connect a compatible Type-C cable and 5V / 1A power supply. Follow the supplied charging instructions.
2. Position
Use a suitable magnetic surface or hanging point. Adjust the angle and check that the light is secure.
3. Select
Choose High, Low, or Strobe for your task. Switch off after use and recharge when needed.
Technical specifications
| Light source | COB LED |
|---|---|
| Rated light output | 3000lm |
| Power | 12W |
| Lighting modes | High / Low / Strobe |
| Mounting options | Magnetic end mounts and hanging hooks |
| Battery | Built-in lithium battery: 2 × 2600mAh 18650 cells |
| Charging input | Type-C, 5V / 1A |
| Listed runtime | 3+ hours; actual runtime varies with mode and conditions |
| Housing / color | ABS / Green with black ends |
| Water resistance | IPX4 splash resistance; not for immersion |
| Dimensions | Approx. 51.3 × 5.1 × 5.1cm / 20.2 × 2.0 × 2.0in |
| Weight | Approx. 541.5g / 19.1oz |
| Package includes | 1 × rechargeable LED work light with hook |
Use & care
Keep the light clear of hot surfaces and moving parts. Avoid looking directly into the beam. Switch off before cleaning and wipe the housing with a soft cloth.
Dimensions are approximate. Color may vary slightly with lighting and screen settings. Follow the instructions supplied with your light.
Make room for better task lighting.
Portable power. Flexible positioning. Light where you need it.